24
Akku-Star 2 in 1
EN
Preparations
Charging station on the wall
mounting
Align the screws supplied vertically
underneath each other on the wall
with a gap of 37 mm. Suitable dowels
are also supplied.
Hang the drill holes on the rear of the
charging station onto the screws.
NOTE!
You can also put the charging station
►
onto a horizontal surface.
Charging the battery
NOTE!
When charging the battery of the
►
hand vacuum cleaner for the first
time, make sure it is connected for at
least 12 hours.
Switch off the hand vacuum cleaner.
Insert the power adapter of the charg-
ing station into the mains socket.
Put the hand vacuum cleaner into the
charging station. Charging begins and
the charging control indicator (3) lights
up.
Charging is completed when the charg-
ing control indicator extinguishes and the
hand vacuum cleaner is ready for opera-
tion.
Pull the power adapter out of the
mains socket,
Operation and use
Using the appliance
Charge the battery as described in the
section
Charging the battery (page
24)
.
Insert the desired nozzle into the
holder (8) in the dust container.
Push the ON/OFF switch (4) to the
"ON" position to switch on the hand
vacuum cleaner.
Switching off the appliance
Push the ON/OFF switch (4) to the
"OFF" position to switch off the hand
vacuum cleaner.
Emptying the dust container
To empty the dust container (9), proceed
as follows:
Switch off the appliance.
Press the unlocking button (5), hold it
down and pull the dust container off
the hand vacuum cleaner.
Empty the dust container.
If necessary , clean the dust con-
tainer.
Push the dust container onto the drive
unit until it audibly snaps in.
