
STEP 2. Wing Assembly
Wing Brace (x2)
Wing Screw (x4)
Needed for STEP 2
• Lay wing flat on table, place book on center
section to hold it flat.
• Position wing tip 2" above table top by
placing transmitter under wingtip.
• Remove sticky tape backing from wing
brace and attach as shown.
• Insert wing screws and fasten very tightly
until screw stops.
• Repeat with other wing brace
• It is
VERY IMPORTANT
to secure wing
braces so both wing tips are the same
2" height.
4
2"