Step 5
9
T
ail Control T
est continued
Step 5
8
T
ail Control T
e
st
WA
TCH OUT!
Be sure to keep ever
ything clear of
the propeller before starting the control test, in
the event that you accidentally turn on the motor
.
1.
Switch on the transmitter
. Check the LED.
Do not touch the sticks for 2 seconds while
the transmitter automatically calibrates the
controls.
2.
Install the batter
y in the fuselage slot and plug
in the connector
.
3.
Move the right stick side to side. The flaps
should move as on the following page. If each
flap is not level with the rest of the tail sur
face
when the right stick and trim lever are cen-
tered, adjust the control lines so they are level
(see page 20).
Note:
The small levers under or beside the con-
trol sticks
are called trim levers and are used to
adjust the "neutral" point of your control stick. It's
ver
y important that these levers are centered
when switching on the transmitter and per
forming
the control test.
View from Rear
Moves Up
Moves Up
View from Rear
5611_5(fbcmdr manual) 3/12/03 2:16 AM Page 8
