Step 3
7
Step 2
6
Motor Test
Wing and Landing Gear Attachment
continued
1. Be sure throttle slider is in the Off position.
2. Turn the transmitter on.
3. Install the battery in the fuselage slot and plug
in the connector.
4. The Aerobird Challenger
™
has a built-in throttle
arming feature, which needs to “see” the throttle
slider in the Off position before it will spin the
propeller. First, keep all objects clear of the
propeller. Advance the throttle forward and the
propeller will start to turn. Since most batteries
come partially charged, the propeller should spin
at high speed. The throttle arming feature will
need to be activated each time the battery is
plugged into the airplane. (If the motor does
not run, proceed to Step 4: “Charging the
Aircraft Battery.”)
5. When finished with the motor test, be sure to
disconnect the battery first then turn off the
transmitter.
Attaching the Tail Wheel
• Installation of the included tail wheel is optional.
If added, be extremely careful to adjust the
tail screws and tail to their original positions.
Adult Supervision Required
WARNING: Keep everything clear of the propeller
and hold the plane securely. A moving propeller
can cause severe injury.
5723_HBZ(fb cllngr. manual) 5/28/03 5:00 PM Page 6
All manuals and user guides at all-guides.com
