IQ32 SDR TRANSCEIVER OPERATIONS MANUAL
P a g e
| 43
Screen Calibration
The first time you turn on the IQ32,
you should perform a touch screen
calibration. The
S
PLASH
S
CREEN
ure 57, will prompt you to press both
rotary encoders.
You may have to turn the unit off and
back on again if you do not press the
encoders soon enough after the
S
PLASH
S
CREEN
has been displayed.
You may calibrate the touch screen
anytime you are having trouble initi-
ating an action when touching the
screen.
The calibration option is always
available at turn on. It may also be
initiated from the
A
DVANCED
S
CREEN
by touching the
Cal Screen
button.
Figure 58 shows the
C
ALIBRATION
S
CREEN
. Follow the prompts on the
screen to complete the touch screen
calibration.
NOTE: If you accidently access the
C
ALIBRATION
S
CREEN
, turn the unit off
and then on to continue operation
with the previous settings.
Figure 57: Splash Screen
Figure 58: Calibration Screen