IQ32 SDR TRANSCEIVER OPERATIONS MANUAL
P a g e
| 37
Frequencies Screen
The
M
EMORY
M
ANAGER
S
CREEN
ure 50, provides a means to save
and select different frequency and
mode configurations. For conven-
ience, the buttons are labelled
Memory 1
to
Memory 14
. These la-
bels may be edited to reflect your
frequency and mode selection.
Touching the desired memory button
brings you to the desired
H
OME
S
CREEN
, mode and frequency.
You cannot edit the operating infor-
mation on this screen. You can only
edit the label.
To configure the operating infor-
mation for any memory button, touch the desired button. This brings you to the
H
OME
S
CREEN
.
Next select the desired frequency, mode, AGC, filter, etc. for your desired operation. This is au-
tomatically saved in non-volatile memory.
Select a second memory button and configure it as desired. Returning to the first memory but-
ton, the previously saved parameters are restored.
After selection of a memory button, any operating changes made, such as a new frequency,
are saved to the memory
button’s non-volatile memory. You do not have to manually save the
information.
NOTE: This means you may inadvertently change the configuration of a memory button.
Memory 1
through
Memory 14
have macros
<M01>
through
<M14>
assigned to them. These
macros may be used with the Keyboard Fn and Screen Fn function keys.
Macro
<NxMem>
may be assigned to a
K
EYBOARD
F
N
or
S
CREEN
F
N
key. This macro will step
through
Memory 1
,
Memory 2
,
Memory 3
,
Memory 4
and
Memory 5
for easy selection of fa-
vorite operating modes.
With the default factory settings and a PS2 keyboard attached,
F12
may be used to step
through
Memory 1
to
Memory 5
.
The
UP ARROW
(
)
and
DOWN ARROW
(
)
keys may be used to step through
Memory 1
through
Memory 14
.
Figure 50: Memory Manager Screen