Secure with a woodscrew in each corner. Again drill pilot holes to prevent the wood from
splitting.
Repeat for all four servos. Note the orientation of the servo door with respect to the wing.
Keep the orientation of the flap servo the same, as below
Step 2: Control surface attachment
The aircraft is supplied with the control surfaces in position, however they are not glued in
place. To attach them securely, first remove the surface and hinges from the plane. Use a
small drop of CA glue to secure each hinge to the surface, making sure appx. half of each
hinge remains exposed. Next, drop a small drop of CA on the tip of each hinge and slide it
into place. Repeat for all surfaces.
