11
Step5. Mount the Receiver and Battery onto the fuselage
1. Fit the battery on the battery rack
on the bottom of fuselage, and
bundle tightly with Velcro strap.
Please note the position of battery in
the fuselage should be base on the
C.G point. Cover the battery rack
cover on the fuselage after fixing the
battery on the fuselage.
2. Connect the Motor, ESC and
battery together, and then insert the
ESC into the fuselage.
3. Install the two rudder control
pull-pull cable into fuselage.
4. Covering the engine cowl on the
motor in order to measure if the
motor on the correct position. With
4pcs of self-tapping screws screw
you can mount the motor cowl on
the fuselage. And then install the
propeller and spinner on the motor.
Step 6. Mount the wing onto the fuselage
Locate the carbon fiber dowel and
the aluminum wing tube. Remove
any protective film from the wing
tube and file off any burrs or sharp
edge on the ends. Slip the tube into
each wing separately. Slip the carbon
fiber dowel into the factory-drilled
hole in one wing and slide the wings
together. The wings should fit together snugly at the center and line up
