【Product operation steps】
Three buttons respectively is MENU/UP/ENTER.
MENU: The function in the main interface is ENTER, and the function in setting parameters state is exit/cancel;
UP: Switching over the status page displays when in the State interface, and under the state of setting, is a button of changing parameters.
ENTER: It may delete all state values, if pressing for a long time in the state of display. Such as maximum speed, maximum
rotational speed, mileage, time, accelerate. It is the button of setting up and saving in the state of setting.
Connect the line and press UP and get into the display state:
Interface of power on.
1. Press the key MENUE can enter the option of round setting, the Motor pole logarithm setting, the unit setting:
①. Motor pole logarithm setting.
Press ENTER to Motor pole logarithm setting.
Press UP to set value.
(According to the actual magnetic pole of different Moter to set up, the typical set up is 1 pair.)
Press ENTER to save the value.
Manual of the SPEED METER
SPEED FOR CARS
-3-
NS num setting
NS:01 Pair
NS num setting
NS:01 Pair
NS num setting
NS:02 Pair