Hobby 350 TB De Luxe, Operation Manual

Page: 19 / 147

03-2
The Truma mover H SE / H TE has been type-ap -
proved and a general operating licence has been
issued for Germany. In Germany, approval is
not required by a technical support organisation
(TÜV, DEKRA). However, the general operating
licence must be kept in the vehicle at all times.
2
3
Only the Truma mover for the models
H SE and H TE may be mounted in
the existing holes.
Mounting the H SE or the H TE movers
without angle brackets
l
is not per-
mitted.
It is not possible to mount the mover
H SE / H TE to any of the WLU mo
-
dels, because the installation space
is blocked by the hot air ducts.
Please see your Hobby dealer for
further information or to have the
complete system mounted.
3.3 Safety coupling
WS 3000
The camper has been fitted with a safety coupling
with tracking stabiliser to prevent it from beco-
ming pendulous or pitching. This system con -
forms to ISO 11555-1. It has been permitted for
use up to a maximum speed of 100 km/h.
Please note the additional operating instructions
and the manufacturer's safety instructions.
WARNING:
A safety coupling does
not suspend the laws of physics. If
the limits (of speed and weight con -
ditions) are exceeded, traction and
cornering force are reduced, which
then becomes the responsibility of
the driver. Therefore, avoid elevated
risks.
It is not possible to mount the H
SE mover on the following models;
alternatively, however, the Truma SE R
standard mover can be mounted:
• 350 TB, 400 SFe (longitudinal beam
is too short; therefore, not enough
room in front of the axle)
• 540 WLU and 560 WLU (space for
mounting blocked by the styrofoam
insulating case made by Düker)
• 720 KFU, 780 WLU and all models
that can carry a load of 2,200 kg