11
Under Programmable Mixing 4, set AILE
to mix to FLAP. The settings are shown in
the photo below. This is mixing the Aileron
to the Right Vectored Thrust Nozzle.
Set switch to "FLAP 2" to Activate/Deactivate
Aileron Vectored Thrust mixing.
To provide smooth flying, you will want to
adjust the radio for the following Dual Rate
and Exponential settings. This will make
your Su-34 Fullback easier to fly.
Checking the Mixing
Use the following diagrams to check the mixing of the
control surfaces in relationship to the vectored thrust.
Elevator Operation
When the "MIX" switch is activated, the vectored
thrust nozzles will move in unison with the elevators.
When the elevators are centered, the vectored thrust
nozzles will be centered.
When down elevator is given, the vectored thrust
nozzles will move downward.
When up elevator is given, the vectored thrust nozzles
will move upward.
When the "MIX" switch is Deactivated the elevators
will function normally but the vectored thrust nozzles
will not move.
NOTE
: Vectored thrust to Elevator mixing should be
deactivated during take off and landing of the model.
Summary of Contents for SU-34 Fullback
Page 1: ......
