8
17. Insert the rudder pushrod Z-bend into the
outermost hole on the inboard bell crank
as shown in the photo. Repeat for the
opposite side of the stabilizer.
18. Place the stabilizer in position on the
fuselage and screw into position with the
long screws as shown. Note: it is not
necessary to glue the stab in position.
19. . Snug each screw in position. Do not over
tighten.
20. Attach the elevator pushrod to the control
horn in the outermost hole. After powering
up the radio system and with your control
trims in neutral adjust clevises so that the
elevators are in neutral.
Summary of Contents for Apache Princess
Page 1: ...1...
