Hobbico TZNA1100, Instruction Manual

Page: 5 / 12

5
KIT CONTENT
❍
1 Fuselage with canopy
❍
2 Wings
❍
3 Horizontal stabilizer
❍
4 CFK wing joiner
Parts not shown on the picture :
In addition, the kit include the following items :
❍
(1) Wing lock
❍
(1) Nylon wing screw
❍
(1) Horizontal stabilizer screw
❍
(1) Y-Lead
1
2
2
3
4
KIT CHECK
Before starting to build, use the Kit Contents list to take an
inventory of this kit to make sure it is complete and inspect the
parts to make sure they are of acceptable quality. If any parts
are missing or are not of acceptable quality, or if you need assis-
tance with assembly, contact Revell Product Support.
Service Department – Revell GmbH
Henschelstr. 20-30, 32257 Bunde, Germany
Tel. 01805 110111 (only for Germany)
(14 Cent/Min. when called from landline)
(Mobile: max 42 Cent/Min.)
Email: Hobbico-Service@Revell.de
PREPARATIONS
❏
1. If not done yet, unpack each part of this kit and check
them all. If any part is defective or missing, please, contact
Revell Product Support.
Service Department – Revell GmbH
Henschelstr. 20-30, 32257 Bunde, Germany
Tel. 01805 110111 (only for Germany)
(14 Cent/Min. when called from landline)
(Mobile: max 42 Cent/Min.)
Email: Hobbico-Service@Revell.de
❏
1. Set the horizontal stabilizer at the top of the vertical fi n.
Be sure the positioning pins at the top of the fi n are correctly
inserted into the holes under the stabilizer.
ENGLISH