Troubleshooting
MicroSnap Motor 2.2 . . . . . . . . . . . . . . . . . . . . . . . .HCAC1301
MicroSnap Motor 2.6 . . . . . . . . . . . . . . . . . . . . . . . .HCAC1305
MicroSnap Motor 3.0 . . . . . . . . . . . . . . . . . . . . . . . .HCAC1307
MicroSizers Pit Case . . . . . . . . . . . . . . . . . . . . . . . .HCAP0003
Guide Rail & Pylon Set . . . . . . . . . . . . . . . . . . . . . . .HCAC1203
PowerBrutes Arena . . . . . . . . . . . . . . . . . . . . . . . . .HCAC1204
R/C MicroSizers
Stage a battle of the PowerBrutes
The optional R/C MicroSizers PowerBrutes Battle Arena (sold
separately) provides the perfect test of your battle skills and a
stage to see whose PowerBrutes is the MOST powerful!
·
Navigate narrow bridges and rugged platforms.
·
Reach the rotating central platform for a fierce Lug vs.
Scrape showdown!
·
Arena sections can be rearranged for endless variety of
maneuvering challenges.
TRUCK DOES NOT RUN
TRUCK DOES NOT OPERATE PROPERLY
TRUCK MOVES UNCONTROLLABLY
Transmitter battery capacity is low, or no
batteries have been installed.
Transmitter is not switched on.
Model is not assembled correctly.
Radio signals don't seem to reach the model.
Motor/battery life has expired.
Is there dust on the tires and/or wheels?
Is the trim lever in a straight position?
Are you driving your truck on a rug?
Interference from reflected radio waves
Are you running with another truck on the
same radio frequency?
Install two brand-new "AA" alkaline
batteries (they MUST be alkaline).
Move the switch of the transmitter to "ON".
Then, charge the truck and race.
Reassemble it correctly, paying close
attention to the instruction steps.
Fully extend the antenna. Maximum range
is 8 to 10 feet [2.4-3.0m].
Replacement motors are sold separately.
Remove dust/lint from the tires and wheels.
Adjust the trim lever until the truck moves
straight ahead.
R/C MicroSizers PowerBrutes are not
intended for running on rugs or carpets.
Turn off electronic devices or move to a
different location.
Each truck must be on a different frequency.
Symptom
Probable cause
Correction
Entire Contents © Copyright 2003 V1.0 Printed in China
HCAZ0421 for PowerBrutes
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept interference received, including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
Meets Canada 210 requirements.
Carrier Frequency: 27.145MHz Power: 2µV/m Carrier Frequency: 49.860MHz Power: 4µV/m
