If you have an airplane that follows either path (A)
or (B), using a hobby knife, cut the sides of the
elevators as shown in the photo above.
If your airplane follows path (A), bend the elevator
tabs up.
If your airplane follows path (B), bend the elevator
tabs down.
❏
3. Repeat step 2 until your airplane follows path C.
If you have an airplane that follows either path (D)
or (E), using a hobby knife, cut the sides of the
ailerons as shown in the photo above.
If your airplane turns to the right (E) during glide
tests, bend the right aileron tab down and the left
aileron tab up.
AILERON TRIMMING
8
D: Airplane turns left.
E: Airplane turns right.
