Turn the hang glider upside-down. Slide the forward
and aft landing gear into the slots in the bottom of the
undercarriage. If the landing gear feels loose, gently
spread the U section of the landing gear wire apart
slightly and reinstall it.
❏
1. Remove the sail retaining strap and set it aside.
When transporting the Skysailer, fold the sail back
and retain it with the strap.
❏
2. Carefully open one side of the sail and rotate the
“cross spar” out. Attach the end of the cross spar to
the outer sail spar. Repeat the process for the other
side.
❏
3. Carefully rotate and lock the sail guard 90
degrees to the centerline of the sail.
❏
1. Hold the Skysailer upside down. Push the battery
hatch cover latch toward the rear of the undercarriage to
unlock it and then lift it out.
❏
2. Gently pull the battery plug outside the
undercarriage. Check that the power switch, on the
bottom of the undercarriage is in the “off” position.
❏
3. Connect the motor battery to the battery plug in
the undercarriage. It will only plug in one way.
INSTALL THE MOTOR BATTERY
SAIL PREPARATION
INSTALL THE LANDING GEAR
5
