background image

11

TROUBLESHOOTING

PROBLEM:

 The Flitt App will not connect to the drone

SOLUTION:

  (1) Completely close the Flitt app if it is open.

(2)  Open the Wi-Fi setting for the phone and select 

the Flitt network if not already connected. 

(3) Open the Flitt app.

PROBLEM:

 I cannot remember the Wi-Fi password.

SOLUTION:

  The default password is 12345678. If the password 

has been changed, reset the setting on the Flitt to 
restore the default Wi- Fi name and password.

PROBLEM:

  The LED on the charger will not illuminate.

SOLUTION:

  With the battery in the charger, unplug the power 

cord and reconnect.

PROBLEM:

  The picture won’t show on the screen or is very choppy.

SOLUTION:

  Restart Flitt, re-connect to WiFi, once confi rmed that 

you are connected, only then open the app.

Other troubleshooting tips can be found at:

http://support.fl ittcamera.com/index.php

LIMITED WARRANTY

Warranty Overview

•  Warranty period: 90 days from the original date of purchase.
•  Warranty claims may only be made by the original purchaser.
•  Receipt proving valid purchase date and location is required for warranty service.
•  Support website: https://cmecamera.com/support
•  This Warranty Overview does not include all parts of the warranty. Please read the 

full warranty and disclaimers below.

Introduction and Your Rights.

Hobbico, Inc., (“We”) sincerely want our customers to be satisfi ed with the Flitt™ micro 
folding fl ying camera products (each, a “Product”) that they purchase from us, but we 
understand that despite our strict quality control efforts, on occasion a product could be 
defective or cease to perform as warranted.
Set forth on the following pages is the Limited Warranty that applies to your Flitt Camera 
Product, certain of its components, and certain accessories or spare parts that you may 
purchase from us for use in connection with your Flitt Camera Product.
The next several pages are the Limited Warranty that applies to your Flitt Camera 
Product, certain of its components, and certain accessories or spare parts that you may 
purchase from us for use in connection with your Flitt Camera Product. Any components 
of the Flitt Camera Product, such as motors, that are specifi cally covered by this Limited 
Warranty, and that you purchase from us as spares or replacements, are also covered 
to the extent provided in this Limited Warranty. While not all parts or components are 
covered by this Limited Warranty, as explained below, they may still be eligible for refund 
or exchange under the terms of our Refund and Exchange Policy, also provided below.
Under this Limited Warranty, as more fully described in the “Warranty Disclaimers and 
Limitation of Liabilities” Section below, we disclaim all implied warranties and, to the 
extent that such implied warranties cannot be disclaimed under applicable law, we limit 
the duration of such implied warranties. We also disclaim any obligation for certain types 
of relief, like incidental and consequential damages. Please note:

•  Some States do not allow limitations on how long an implied warranty lasts, so the 

above limitation may not apply to you.

•  Some States do not allow for the exclusion or limitation of incidental or consequential 

damages, so the above limitation or exclusion may not apply to you.

•  This Warranty gives you specifi c legal rights, and you may have other rights which 

vary from State to State.

Summary of Contents for FLITT HCAE11 Series
















Reviews: