Hobbico FLITEWORK SHINY FLWA4180, Instruction Manual

Page: 5 / 12

- 5 -
Prepare the elevator , the elevator flaps, the connection
bracket and the 6 piece fleece hinges.
Put the lighting connector in a position, that you can insert
the elevator easy into the fuselages cut out. On the left
side, there is some space to place the cable temporary.
Insert the elevator into the fuselage and take care, that
there is the same distance on both sides. Also the eleva-
tor should have a right angle against the center line of the
fuselage.
Check with a measuring tape the distance from both
sides, like you can see in the picture.
Mark the position of the elevator, using a fine non perma-
nent marker on upper and lower side of the elevator.
Now take out the elevator from the fuselage and remove
the covering film between the marks, you have made
before.
Don’t hurt the balsa wood planking with the hobby
knife!