1. Using a small Phillips head screwdriver,
loosen the battery cover screw and
carefully remove the cover from the back
of the transmitter.
2. Install a new 9V battery. Make sure
that the (+) positive and (-) negative tabs
match up correctly with the diagram
molded inside the battery compartment
of the transmitter.
Replace the transmitter battery cover and
tighten the screw (do not over-tighten).
3. Insert the antenna into the hole on top
of the transmitter and twist it in a
clockwise direction until tight. Do not
over-tighten the antenna.
PREPARE THE BATTLE TANKS
1.
Using a small Phillips head
screwdriver, loosen the battery cover
screw and carefully remove the cover
from the bottom of the tank.
2. Install 6 new 'AAA' batteries. Make
sure that the (+) positive and (-)
negative poles match up correctly with
the diagram molded inside the battery
compartment of the tank.
3. Replace the tank's battery cover and
tighten the screw (do not over-tighten).
Now your battle tank is armed and
ready to fight!
PREPARE THE TRANSMITTERS
