Hobbes TEST-i PRO 258011, User Manual, Page: 9 / 30

5. QuickTest
TEST–i Pro also provides Quick Test function to test
a large number of cables in a short time:
1. Select QuickTest in main menu then press ENTER.
2. Select StandDefine to create the standard pin–to–pin
connectivity as the model, the standard will be
compared to other cable and determine whether the
cable is good or bad. The standard cable will be saved
as “Standard Record” automatically, and user can be
able to browse it.
QuickTest
StandDefine ← V/X
StandDetail
09
A01 A02 A03 A04
A05 A06 A07
→
3. If no cable connected to the tester, it will display the
test result as follow:
V means there is standard define and X means
standard define is clear
3. If the standard is defined, select QuickTest to check
the cable status. If the cable pin–to–pin connectivity
matches the standard, TEST–i Pro will display Pass,
and beep once. You can press DOWN button to browse