Page.98.
Otherwise it will damage the IP camera.
c. The instrument’s PoE maximum power output is 24W. If Ultra- high-power load happens, the tester
will enter protection mode.
3.7 DC12V 3A power output
When the SURVLtest is turned on, the DC 12V power output is also ON by default. The smaller end of
the supplied converter cable connects to the tester’s DC12V/3A OUTPUT and the other end connects to
the camera’s power input.
Application
Power output function is mainly used in the camera field demonstration and testing, meanwhile, for
some cameras installation sites, if there is no power outlet for the adapter to power the camera, the tester
can offer temporary power for it. But we do not suggest tester supply power for a long time.