03
Introduction
Fiber Checker Pro II is used during installation
and repair to find faults, checking continuity,
verifying signal path and identifying fiber.
It tests single–mode, multi–mode and plastic
fibers. It has the capacity to test fiber
cables ranging 0 to 5km. Fiber Checker Pro II
emits a bright red light that can easily locate
a fiber fault or a loss point.
When testing for continuity, it discloses the
fiber cable being tested from a bundle of
fiber cables. Alternatively, a fiber route can
be confirmed by bending a patch cord for
the red light to expose out of the patch cord.
The universal connector adapter is suitable
for 1.25mm or 2.5mm fiber optic connectors,
and with its ceramic alignment sleeve, it
ensures durable operation. Now with waterproof
design and its high quality material, the Fiber
Checker Pro II can withstand dust, humidity,
and immersion in 1m of water.
