MADE IN GERMANY
Legal inspections
Extinguishers are subject of periodic checks for
function and safety. Legally prescribed inspections
are country specific and vary. The owner is
responsible for compliance with prescribed
intervals. Therefore, the container is labeled with
badges for the date of manufacturing and the
maturity of the next inspection. The punched-out
areas mark the exact period.
Pressure safety
The entire pressure system is extremely
robust and designed to withstand high
overload. In addition, there is an
automatic pressure relief valve for safe
discharge of potential overloads. It is
located at the protected position between
container and backpack and requires no
maintenance.
Safety
valve
The safety valve is precisely adjusted and sealed.
Do not adjust or work at it with tools.
If the safety valve is responding, only the effect, not
the cause of excess pressure is eliminated. The
device must be checked thoroughly before next use.
Compressed air cylinders too must be approved and
tested regularly. Please keep yourself informed about
the regulations in your country.
The badge for the next inspection date must be updated
after every inspection.
www.hne.ag
VARIO CARBON
