VARIO 9
HiPRESS 4 und 4
duo
MADE IN GERMANY
www.hne.ag
HiPRESS 2
Basic rules for refilling
The extinguisher achieves optimal performance only when
accurately filled. Prepare things thoroughly and perform all steps
with necessary care. We recommend a clean and steady work
area with water supply.
Avoid spilling of extinguishing agent. Flush affected
surfaces and components with water.
Empty the container completely before filling.
Dispose of chemicals with ecological responsibility.
Do not use any leftover extinguishing fluid again.
Never overfill the container.
The threads of container and lid have to be free of dirt
and debris. Clean it if necessary and apply a light coat
of silicone grease.
Always wear goggles, gloves and apron when dealing
with extinguishing agent. The chemicals can cause skin
irritation or allergies.
After contact with eyes or mouth, immediately flush out
with plenty of clean water.
Also observe the safety instructions in the data sheet of
the extinguishing agent manufacturer.
Extinguishing agents are polluting and hazardous to
health. They must not seep into soil or sewer system.
Use a suitable container to dispose of it in an
environmentally friendly way.
We recommend to mark the extinguisher after filling as
ready for use. For example, a paper seal can state the
date and type of extinguishing agent.
