8 (22)
6
Operation
6.1
simplyCAN Bus Monitor
Fig. 1
simplyCAN bus monitor
►
Start the simplyCAN bus monitor.
→
If one simplyCAN is connected to the computer, the device is automatically selected
and connected (
1
).
►
If several simplyCAN are connected to the computer, select the desired device (
1
) and click
button
Connect
(
2
).
→
Information about the device are displayed (
4
).
The simplyCAN bus monitor can be opened several times to connect several simplyCAN devices
simultaneously.
►
To change the device, click button
Disconnect
(
3
), select the device in drop-down list
Select
device
(
1
) and click button
Connect
(
2
).
►
Select the desired CiA baudrate (
5
).
►
To start the communication, click button
CAN start
(
6
).
→
CAN messages are shown in the window
Output
(
8
).
→
In transmitted messages the time stamp is 0 and the flag
S
is displayed.
►
To send a message, enter the message in the
Transmit
line (
9
) (see
for more information).
►
Click button
Send
(
9
).
→
If the entered message is valid, the message is transmitted.
→
If the entered message is invalid, the error message
Syntax error
and a description of
the message format is shown.
►
Stop the communication with button
CAN stop
(
7
).
simplyCAN User Manual
4.01.0001.22001 1.0 en-US
