14 (38)
6
Configuration
6.1
Accessing the Device
Fig. 3
Ixxat Energy IP configurator
The IP address can also be determined with other IP/Mac scanners. If the IP address of the device is
already known, the configuration can also be done in the WEB-PLC.
►
Connect the device to the computer (see
).
►
Download the latest Ixxat Energy IP configurator from
►
Start Ixxat Energy IP configurator.
→
Ixxat Energy IP configurator scans for SG devices on the local network.
→
Found devices are shown in drop-down list (
1
).
►
To identify the device, compare the number in the list (
1
) with the MAC on the label of the
device.
►
To rescan the network click button
Scan
(
2
).
►
Select desired device in drop-down list (
1
).
→
Current IP configuration of the device is displayed (
4
).
→
By default the device tries to get an IP address from a DHCP server.
►
Check if settings match the needs of the network.
►
If necessary, use a static IP address:
►
Uncheck
Use DHCP
(
6
) and set the IP address manually (
4
).
►
Click button
Configure
(
5
).
►
In the opened popup enter username (default: ixxat) and password (default: ixxat) and
click
OK
.
→
If the configuration is successful,
Configuration completed
is shown.
►
If desired device is selected and configured, click button
Connect
(
3
).
→
Standard browser to access the WEB-PLC and to configure the device is opened (see
Accessing the Embedded WEB-PLC, p. 15
SG-basic User Manual
4.01.0401.20001 1.1 en-US
