Intesis
TM
KNX
– BACnet Client
User Manual r1.2 EN
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL
http
s
://www.intesis.com
20 / 26
By clicking each of the devices, its Device Name, Instance, Network Number and Vendor Id will be given in the center
of the dialog.
Once list of devices is shown, next step is obtaining their list of objects. This can be done in two ways:
•
Selecting a particular device and clicking at
Discover
button
•
Checking all devices whose objects are to be scanned and clicking at
Discover Checked Devices
button.
This must be used with care when many devices are checked at once. Resulting scan time can become very
large.
Either way, when having discovered objects under a BACnet device, they are shown in the list at the right part of the
window:
Figure 5.9
BACnet Explorer showing objects found under a BACnet device
After objects have been discovered, it must be selected both the BACnet devices to be integrated, as well as the
signals of each that are are desired in the project.
Figure 5.10
BACnet Explorer with a selection of objects and devices to integrate
In the example above, if Apply button is pressed, two devices will be integrated: