HMS H6191, Manual Instruction

Page: 24 / 56

ASSEMBLY INSTRUCTION
1.
Front and Rear Stabilizers Installation
Attach the Front Stabilizer (10) onto the front curve of
the Main Frame (1) with two M8 x 55 Hexagon Bolts (9).
Tighten bolts with Multi Hex Tool provided.
Attach the Rear Stabilizer (7) onto the front curve of
the Main Frame (1) with two M8 x 55 Hexagon Bolts (9).
Tighten bolts with Multi Hex Tool provided.
2.
Handlebar Post Installation
Remove six M8x15 Hexagon Bolts (42), two Φ8×Φ16×δ1.5 Flat Washers (52) and four
Φ16×Φ8×1.5 Arc Washers (33) from the tube of Main Frame (1). Remove bolts with S6
Allen Wrench provided.
Connect the Sensor Wire (53) from the Main Frame (1) to the Extension Sensor Wire (49)
from the Handlebar Post (5).
Insert the Handlebar Post (5) onto the tube of Main Frame (1) and secure with six M8x15
Hexagon Bolts (42), two Φ8×Φ16×δ1.5 Flat Washers (52) and four Φ16×Φ8×1.5 Arc
Washers (33) that were removed. Tighten bolts with S6 Allen Wrench provided.
3.
Left/Right Handrails and Foot Bars
Installation
Place the Rotation Rod (37) into the hole of the
Handlebar Post (5) . Slide the Left/Right
Handrails (3L, 3R) onto the Rotation Rod (37)
and secure in place with two M8x20
Hexagon
B olts (16), two Ø19.5xØ11.5xδ3.0 Spring
Washers (15), two Ø16xØ28x5.0 Washers (14)
and two Ø17xØ22xδ0.3 Arc Washers (38).
Tighten bolts with one S6 Allen Wrenches
provided.
Attach the Connection Tube (12L,12R) onto the
Left and Right Foot Bar (2L,2R) with two
M10x60 Hexagon Bolts (20), two Ø10x20x2.0
Flat Washer (22), two M10 Nylon Nut (8). Tighten
bolt and nylon nut with one S6 Allen Wrench.
Attach the Left and Right Foot Bar (2L,2R) onto
the Crank of Main Frame (1) with two M8x20
Hexagon Bolts (16), two Ø19.5xØ11.5xδ3.0
Spring Washers (15), and two Ø16xØ28x5.0
Washers (14). Tighten bolts with one S6 Allen
Wrench provided.