17 (24)
•
Power off the Ewon Cosy+ and power it on again to reboot the unit in a normal mode. As
described before, the Cosy+ returns to its default COM parameters and factory IP addresses
(such as LAN 10.0.0.53) after this level 2 reset is performed.
Any other LED pattern reflects a problem. The pattern will start with 200ms on (start of the
pattern) followed by off and a certain number of times of a 1 second on allowing to identify the
nature of the detected problem. If an error pattern occurs on the
USR
LED, please check out the
troubleshooting page:
6.3
Impact Matrix of a Reset
Reset level
Erased or Reset
Preserved
Impact of a reset level 1
User reset
adm
password
LAN IP a mask
Cosy+ identification
Internet access
User web site
Language settings
Modem / Wi-Fi settings
Talk2M configuration
Proxy configuration
LAN switch configuration
Gateway (USB, NAT 1:1)
1
Impact of a reset level 2
Factory reset
The Ewon Cosy+ will be reset to a factory settings configuration. All parameters will be
lost
Ewon Cosy+ Installation Guide
IG-0031-00 1.0 en-US
1.
Configuration remains even if the Wizards on Ewon web interface indicates otherwise