STEP 5
a.
Attach the part (#10) to the part
(#3) using (2) Hex Bolts
M10*75(#82).
b. Attach the part (#15) to the part
(#10) using (2) Hex Bolts
M10*75(#82). Attach the part (#15)
to the part (#1) using (2) Hex Bolts
M10*80(#81)
.
Note: You must wrench tighten the
bolt (#82) firstly, and wrench
tighten the bolt (#81) finally in
this step.
STEP 6
a. Attach the part (#29) to the part (#6) using (1) Hex Bolt M12*90(#79).
Wrench tighten bolt (#79) then loosen nut (#71),
just enough for part (#29) to pivot freely.
b. Attach the part (#7) to the part (#29) using (1) Hex Bolt M10*85(#94).
Wrench tighten bolt (#94) then loosen nut (#70),
just enough for part (#7) to pivot freely.
c.
Set the Foam (#48) onto the part (#9).
Hint: Any soap and water make it easy.
d. Attach the part (#9) to the part (#7) using (2) Hex Bolts M10*25 (#86).
e.
Insert the Plug φ50 (#53) into the part (#7).
f.
Attach the part (#28) and the part (#96) to the part (#7) using (2) Hex
Bolts M8*70(#88) and (2) Arc Washers φ8 (#76).
g. Assemble the part (#8) using same method.
