Component replacement instructions
hms Anybus X-gateway AB7xxx
4
BW_hms Anybus X-gateway_01_en
EMG Automation GmbH
2.
Then read in the type of X-gateway online (configuration). (Upload)
UPLOAD
3.
Now enter the quantity of Input I/O_data and Output I/O_data.
4.
Then set the X-gateway for your application by transferring (down-
loading) the configuration.
DOWNLOAD
5.
The module is now fully configured and you can terminate the con-
nection to the module.
DISCONNECT
6.
Finally, it is imperative you save this configuration to the hard
drive. This should be a file with the extension .hcg. The file name
should correspond to the project.
See also
Example: CANopen
– Modbus-TCP
A configuration via Modbus-TCP to ProfiNet with two data words (4 bytes) as the out-
put from the Modbus master and 6 data words (12 bytes) as the input to the Modbus
master.
1.
2.
1.5
