HMS Anybus HMS-EN2MB-R, User Manual, Page: 40 / 72

Appendix C: Linking Device Configuration Manager Interface 38 (70)
C Linking Device Configuration Manager Interface
C.1 Menu Options
File
Import
Imports a configuration.
Export
Exports a configuration.
Exit
Edit Select All
Deselect All
Tools Edit Modbus Configuration Launches the Modbus-TCP Master
user interface.
Launch IPconfig Scans for devices and configure IP
settings for the linking device.
Caution
Changing the IP address of the linking
device without changing the IP
address in Studio 5000 will make the
linking device unreachable for the PLC
and Studio 5000.
It is recommended to change the IP
address through the Studio 5000
BOOTP tools to guarantee
synchronization.
Create Mapping Report
Exports a detailed list of all tags,
including the address offset in each
assembly where the tag is located in
the Ethernet/IP process data.
Use for documentation or error
tracking. Not required for function.
Factory Reset
Resets the linking device to default
values.
Reboot Sends reboot command to the linking
device.
Restore Configuration Reverts to the latest stored
configuration from Studio 5000.
Wink Makes all left LEDs blink.
Use to identify the particular linking
device among multiple installations.
Options Hides report on retrieve configuration
from gateway.
Groups tags on PLC by Modbus server.
Help About
C.2 Tag Editor Options
Select All Checks the “Include” check box for all tags associated with
that server/transaction.
Deselect All Unchecks the “Include” check box for all tags associated
with that server/transaction.
Convert Transactions to Arrays
Attempts to create the biggest possible array for every
transaction in that tree branch
• Ignore Transactions With Existing Arrays
If there are already arrays in the transaction/
transactions, they will not be affected.
• Override Existing Arrays
Existing arrays may be affected.
Linking Device User Manual
scm-1202–181 2.0 en-US