3 (18)
1
About This Document
This document describes how to install Anybus Wireless Bridge II and set up a
basic configuration.
For additional documentation, configuration examples, FAQs, troubleshooting
guides and technical support, please visit
.
1.1
Document Conventions
The following conventions are used to indicate safety information and other
important content in this document:
WARNING
Instruction that must be followed to avoid a risk of death or serious injury.
Caution
Instruction that must be followed to avoid a risk of personal injury.
Instruction that must be followed to avoid a risk of reduced functionality
and/or damage to the equipment, or to avoid a network security risk.
Additional information which may facilitate installation and/or operation.
1.2
Trademarks
Anybus
®
is a registered trademark and Wireless Bridge II
™
is a trademark of HMS
Industrial Networks AB. All other trademarks mentioned in this document are
the property of their respective holders.
Anybus
®
Wireless Bridge II
™
Startup Guide
SP2167 2.1 en-US
