4 (20)
1.3
Conventions
Unordered (bulleted) lists are used for:
•
Itemized information
•
Instructions that can be carried out in any order
Ordered (numbered or alphabetized) lists are used for instructions that must be carried out in
sequence:
1.
First do this,
2.
Then open this dialog, and
a.
set this option...
b.
...and then this one.
Bold typeface
indicates interactive parts such as connectors and switches on the hardware, or
menus and buttons in a graphical user interface.
Monospaced text is used to indicate program code and other
kinds of data input/output such as configuration scripts.
This is a cross-reference within this document:
This is an external link (URL):
This is additional information which may facilitate installation and/or operation.
This instruction must be followed to avoid a risk of reduced functionality and/or
damage to the equipment, or to avoid a network security risk.
Caution
This instruction must be followed to avoid a risk of personal injury.
WARNING
This instruction must be followed to avoid a risk of death or serious injury.
1.4
Terminology
In this document the TIA-232/485 serial communication standards are referred to as
RS-232/485 when describing hardware, and as EIA-232/485 in the software interface.
Anybus
®
Modbus-TCP/RTU Gateway User Manual
HMSI-168-77 3.0