Configuration
12 (46)
The default configuration for each meter is applied immediately after scanning. Additional
changes to the configuration must be saved manually.
When activating or deactivating a meter, its meter values will automatically be enabled or
disabled according to the hierarchy. An inactive meter will be activated when one of its meter
values is enabled.
Hold down the SHIFT or CTRL keys to select multiple meters or meter values.
Meter tab fields
Field
Description
Writable
Interface
Interface of meter (M-Bus)
No
S
Entry status
E = Value has been edited
* = Value display is limited in the configuration
!
= Unable to read value
No
Serial
Serial number of meter
No
MAN
Manufacturer of meter (3-letter abbreviation)
No
Medium
Medium of meter
No
Version
Version number of meter
No
Link
Primary address
No
Value
Meter reading or measurement value
No
Scale
Scale factor (scientific notation)
No
Unit
Unit
No
Cycle
Readout interval in seconds (0 = use general readout interval)
Yes
User label
User specific description of meter or value.
Included in export of CSV data, allows application specific mapping.
Yes
Description
Description of meter value
No
Register
Modbus register address in steps of 10
Yes
The arrangement of data in the meter list corresponds to the order of the data in the M-Bus
protocol. The meaning of the values can thus be compared directly with the data sheet of the
meter. It is also possible to assign the meter values to the raw data of the meter.
Timestamps
Timestamp values transmitted within the M-Bus protocol are automatically assigned to the
other meter values where possible. This means that some of the timestamps may not appear in
the list. To enable the display of all timestamps values in the list, set the system configuration
parameter
MUC_SHOWTIMESTAMPENTRIES
to 1. See
Configuration Files, p. 39
.
Webserver capacity error
If a scan or a change in the meter list is terminated with the error message “Webserver capacity
exceeded”, see
Troubleshooting, p. 31
.
M-Bus to Modbus-TCP Gateway User Manual
SCM-1202-0096-EN 2.1