14 (26)
►
Make sure, that the latest CAN-Gateway Configurator is installed (check within product
support pages on
www.ixxat.com/support-bridges-gateways
).
►
Start the Ixxat CAN-Gateway Configurator.
►
Open menu
Scan
and select
All Ixxat devices
.
→
Connected devices and firmware version of the devices are shown.
►
Select the type of CANbridge NT in use in drop-down list
Select device type
(
2
).
►
Select the firmware version of the device in drop-down list
Select device version
(
3
).
►
Select the desired operational mode for the device in use in drop-down list
Select
operational mode
(
4
).
►
Select the device in combo box
Target device
(
11
).
►
Click button
Connect
(
12
) to connect the selected device.
→
If device is connected,
STS
(
1
) is green flashing.
→
Information about the target (
1
) device is shown.
►
Make sure, that the CANbridge is updated to the latest firmware.
►
To create a new project file, click button
New
(
5
).
►
To change the current configuration of the device, click button
Read from
(
14
) and save the
configuration.
or
►
Configure the device in the desired mode (see
Repeater/Star Coupler Configuration, p. 15
or
).
6.2
Configuring the Device Name
The displayed name of a connected device can be chosen freely.
►
Open menu
Target
and select
Change device name
.
→
Window
Device Name Configuration
is opened.
Fig. 3
Window Device Name Configuration
►
Enter desired name in field
Device Name
and click button
Save
.
→
Name is written to the device.
CANbridge NT User Manual
4.01.0331.20000 1.8 en-US
