HMS Networks Intesis INMBSMHI048O000, User Manual, Page: 15 / 26

Intesis
TM
Modbus Server
– Mitsubishi Heavy Industries AC
User’s Manual r1.0 eng
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
15 / 26
LinkBoxMB
. Configuration & monitoring tool for Intesis TM Modbus Server
series
Introduction
LinkBoxMB is a Windows ® compatible software developed specifically to monitor and
configure Intesis TM Modbus Server series.
The installation procedure and main functions are explained in the
LinkBoxMB User Manual .
This document can be found in the Doc folder or can be downloaded from the link indicated
in the installation sheet supplied with the Intesis
TM device.
In this section, only the specific case of Mitsubishi Heavy Industries indoor
unit’s integration
to Modbus networks will be covered.
Connections configuration
To configure the Intesis TM 's connection parameters and to see the points list, press on the
Config button in the menu bar (see Figure 4.1). The Mitsubishi Heavy Industries
Configuration window will open (see Figure 4.2). For integrations with large number of
points, there is available an alternative CSV installation procedure explained in the
LinkBoxMB User Manual.
Figure 4.1 LinkBoxMB menu bar
4.2.1 Configuration tab
Select the Connection tab to configure the connection parameters. Two subsets of
information are shown in this window: Modbus RTU, Modbus TCP and Mitsubishi Heavy
Industries interfaces parameters (see Figure 4.2).
Figure 4.2 LinkBoxMB configuration tab
Next, there is an explanation for each of the configuration parameters in each mode.
Modbus
interface
configuration
MHI
interface
configuration