background image

Important User Information

Disclaimer
The information in this document is for informational purposes only. Please inform HMS Networks of any
inaccuracies or omissions found in this document. HMS Networks disclaims any responsibility or liability for any
errors that may appear in this document.

HMS Networks reserves the right to modify its products in line with its policy of continuous product
development. The information in this document shall therefore not be construed as a commitment on the part of
HMS Networks and is subject to change without notice. HMS Networks makes no commitment to update or keep
current the information in this document.

The data, examples and illustrations found in this document are included for illustrative purposes and are only
intended to help improve understanding of the functionality and handling of the product. In view of the wide
range of possible applications of the product, and because of the many variables and requirements associated
with any particular implementation, HMS Networks cannot assume responsibility or liability for actual use based
on the data, examples or illustrations included in this document nor for any damages incurred during installation
of the product. Those responsible for the use of the product must acquire sufficient knowledge in order to
ensure that the product is used correctly in their specific application and that the application meets all
performance and safety requirements including any applicable laws, regulations, codes and standards. Further,
HMS Networks will under no circumstances assume liability or responsibility for any problems that may arise as a
result from the use of undocumented features or functional side effects found outside the documented scope of
the product. The effects caused by any direct or indirect use of such aspects of the product are undefined and
may include e.g. compatibility issues and stability issues.

Copyright © 2021 HMS Networks

Contact Information
Postal address:
Box 4126
300 04 Halmstad, Sweden

E-Mail: [email protected]

Summary of Contents for Ewon Flexy 205





















Reviews: