3. To lock the modules, push in the locking tab located on the upper left side of the E300 Relay Control Module.
4.3. Connect to PROFIBUS Network
The E300 Communication Module has one PROFIBUS D-SUB connector.
IMPORTANT
If a node is the last on a bus segment, use a PROFIBUS connector with built-in and activated
terminating resistors.
For more information about PROFIBUS design and installation, refer to
Anybus-E300-DPV1 - E300 Communication Module for PROFIBUS
Connect to PROFIBUS Network
Page 8 of 28
SCM-1202-203 1.1