1341-ch
2 Printed in Canada
HMI
HOYME Manufacturing Inc.
1-800-661-7382
www.hoyme.com
1. Install the two zone dampers as per instructions
supplied with them.
2. Connect each zone damper to each zone
adaptor as per wiring diagram. Recheck all wiring.
3. Turn thermostat to lowest setting and turn on
the power to the furnace.
4. Test heating/cooling cycles at least three times
to confirm proper operation.
Damper Identification:
For round dampers
use the universal damper
HAC
-0
X
10-O
PC
where
X
= Diameter of damper,
PC
=
P
ower
C
lose.
For rectangular dampers
use the custom made
HCR
-
xxxx
- O
PC
where
xx
- -
= width,
- -
xx
=
height (also the motor side).
For rectangular slip-in dampers
use the custom
made
HSI
-
xxxx
- O
PC
where
xx - -
= width,
- - xx
= height (also the motor side).
SCHEMATIC WIRE DIAGRAM OF
ADAPTOR ADP-0244-05A
Note: This marking is also on the inside of the Adaptor cover.
Schematic Wire Diagram of adaptors ADP-0244-05A connected together
This label is to be placed next to the wiring diagram of the appliance.
