RALPHA
Key Pad Programming
3
K
User Language
0 - - French
1 - - English
2 - - Russian
3 - - German/Swiss
4 - - German
5 - - French/Swiss
6 - - Arabic
L
Baud rate
0 - - 512 BPS
1 - - 1200 BPS
2 - - 2400 BPS
NMOP
No function
Default 0000
QQQQ
Four Digit Password
1234
Press the “
” to return to the main programming menu “
ADSYSBFRQT
”.
6.
Use the “
” to move the cursor to “
FR
” to program the required frequency then press the
“
”, the pager will display:
Ex.:
FR: 457.5750 MHz
. Use the “
” to move the cursor to a digit and press the “
” to
change the digit/number. Press the “
” to return to the main menu screen “
ADSYSBFRQT
”.
NOTE
: Manual frequency programming options is only available if the pager was initially programmed for
manual programming at the factory. Pager will need to be returned to JTECH or an authorized agent to change
to manual frequency programming function.
Only the frequencies within the range of the pager frequency can
be programmed.
7.
Use the “
” to move the cursor to “
QT
”, and
then press the “
” to save the settings and
quit the program.
B. To add/change Capcodes to a pager already in use:
Press
the “
” twice if the pager is in sleep mode to go to the main menu. Press the
“
” to move cursor to “
ON/OFF PAGER
” and press the “
” to turn the page
r OFF.
Follow the sequence from above item 2.