HME ISTATION-N User Manual Download Page 5

HME 800.925-8091

Integration Station Serial Transmitter

Page 5

TESTING THE DEVICE WITH PAGING SOFTWARE

This device had been tested to work with QSR, Radiant, Open Table, Pro-Host or any software product that utilizes
the standard TAP, WaveWare, or Scope Paging protocols. To test the device using your paging software, follow the
procedure below…

x

Add the pagers to the pager list or paging configuration of your existing software. Refer to the list of
pager capcodes on the next page. Be sure to check the pager number, capcode, baud rate and
pager type when you enter the information into your software. The procedure to add pagers to your
paging list is dependent on what software you have. Contact your software reseller for this
procedure if you do not have it.

x

Anytime you send a page with your software the “Transmit Indicator”

will show on the display.

This will confirm that you transmitter was connected properly and compatible with your software.

USING THE DEVICE AS STANDALONE TRANSMITTER

This device can be used as a standalone transmitter in case of software failures. To alert a pager, simply press the
pager number on the transmitter keypad followed by the “send” key. For example, press,

11 - send”

and pager #

11 will signal.

Locate / All Page Feature

This feature causes

ALL

pagers (

that are not charging

) to signal at once. This feature is useful when you are

closed and would like to locate any misplaced pagers around your facility. To locate ALL pagers, press,

1.

“1249 – send”

– for IQ, Coaster pagers

2.

“912 – send”

– for belt clip (Mgr) pagers

Any pager not on a charger will signal. Search for the missing pagers by listening for the beep or voice call and
looking for flashing lights. Remember to check the parking lot and look in the bushes! After finding all the missing
pagers, put them on a charger to stop the “locate” alert.

Never use the locate feature while pagers are with the

guest as all the pagers will alert at once!!!

Transmit Indicator – page being sent
using keypad or thru RS232 port. This
also indicates the Out of Range signal
is being sent.

Keypad

Display

Send button to page

pagers

Summary of Contents for ISTATION-N








Reviews: