HOOKING UP OLD-SCHOOL AUDIO, JACK
COMING CLEAN
1 YEAR LIMITED WARRANTY
STUFF THE GOVERNMENT MAKES US SAY
HELLO? SPEAKERPHONE? YES!
BLUETOOTH
®
CONNECTION, CONTINUED
The device and
Bluetooth
will find each other every time, as long as the speaker is set to
Bluetooth
and your device’s
Bluetooth
is, you know, on.
If you’re connecting to a computer, you may have some extra steps on that end. You’ll
have to get that information from the computer company.
Depending on your device, you may be prompted to enter a pairing code. If prompted,
enter “0000” as the code.
To disable pairing of an existing device and pair a new device, press and hold the
PLAY/PAUSE button for 5 seconds to activate pairing mode.
1. Plug one end of the cord into the speaker
and the other into the headphone jack on
your device.
2. Turn on the speaker.
3. Hit PLAY on your device and crank it up —
or down if you’re lame.
You’ll have to play and pause the music from
your device, not your speaker. No problem.
You’re there anyway, right?
A soft, dry towel is all you need to clean off
your speaker. Using water, harsh cleaners, or
anything else only starts messing with the
mechanics inside. So, yeah, don’t do it.
When friends call asking to join the party — and you know they
will — answer the phone without disconnecting from your HMDX
Rave. Yes, that’s right. Your speaker is a speakerphone too. How
amazing is that? Here’s how it works:
1. Make sure your phone and speaker are connected through
Bluetooth
.
2. Answering and ending a call works the same way: simply click
the PLAY/PAUSE button on your Rave.
3. If you’d rather not talk, hold down the PLAY/PAUSE button on
your Rave for 3 seconds to ignore the call.
THE COOLEST PART: The Rave knows when a call is coming in
and pauses the music before ringing. When you hang up, the
music starts where it left off — and so does the party. If it’s you
making the call, just start dialing from your phone, and the Rave
automatically does its hands-free thing. Isn’t it refreshing to
know your speaker totally gets you?
Situation
Short Press Play/Pause Button
Long Press Play/Pause Button
1
st
Incoming call
2
nd
Incoming call
On call
Both calls active
Pick up call
End call
Call 1 on hold, pick up call 2
Hang up call 1, switch to call 2
Reject call
Move call from speaker to device
Reject call 2
Switch between 1
st
call and 2
nd
call
FCC Disclaimer:
Note: This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
Check out the chart below for a complete guide on handling calls with your Rave.
For detailed warranty instructions and information visit:
USA:
www.hmdxaudio.com/customer-support/warranty-1yr
CAN:
www.hmdxaudio.ca/warranty-1yr
To obtain warranty service on your HMDX product, contact a
Consumer Relations representative by telephone or email for
assistance (you can find their contact info on page 1). Please
make sure to have the model number of the product available.
5s
the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by HMDX could
void the user's authority to operate this equipment
IC Caution: RSS-GEN Issue 4 November 2014
This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions: (1) This device may
not cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
