HOOKING UP OLD-SCHOOL AUDIO, JACK
COMING CLEAN
1 YEAR LIMITED WARRANTY
HELLO? SPEAKERPHONE? YES!
BLUETOOTH
®
CONNECTION, CONTINUED
The device and
Bluetooth
will find each other every time, as long as the speaker is set to
Bluetooth
and your device’s
Bluetooth
is, you know, on.
If you’re connecting to a computer, you may have some extra steps on that end. You’ll
have to get that information from the computer company.
Depending on your device, you may be prompted to enter a pairing code. If prompted,
enter “0000” as the code.
To disable pairing of an existing device and pair a new device, press and hold the
PLAY/PAUSE button for 5 seconds to activate pairing mode.
Note: If you turn on your Hangtime but haven’t started the party yet, it will automatically
power off after 2 minutes of unpaired inactivity.
1. Plug one end of the cord into the speaker and the other into the headphone jack
on your device.
2. Turn on the speaker.
3. Hit PLAY on your speaker and crank it up — or down if you’re lame.
You’ll have to play and pause the music from your device, not your speaker. No
problem. You’re there anyway, right?
A soft, dry towel is all you need to clean off
your speaker. Using water, harsh cleaners, or
anything else only starts messing with the
mechanics inside. So, yeah, don’t do it.
When friends call asking to join the party—and you know they will
— answer the phone without disconnecting from your HMDX
Hangtime. Yes, that’s right. Your speaker is a speakerphone too.
How amazing is that? Here’s how it works:
1. Make sure your phone and speaker are connected through
Bluetooth
.
2. Answering and ending a call works the same way: simply click
the PLAY/PAUSE button on your Hangtime.
3. If you’d rather not talk, hold down the PLAY/PAUSE button on
your Hangtime for 3 seconds to ignore the call.
THE COOLEST PART: The Hangtime knows when a call is coming
in and pauses the music before ringing. When you hang up, the
music starts where it left off — and so does the party. If it’s you
making the call, just start dialing from your phone, and the
Hangtime automatically does its hands-free thing. Isn’t it
refreshing to know your speaker totally gets you?
Situation
Short Press Play/Pause Button
Long Press Play/Pause Button
1
st
Incoming call
2
nd
Incoming call
On call
Both calls active
Pick up call
End call
Call 1 on hold, pick up call 2
Hang up call 1, switch to call 2
Reject call
Move call from speaker to device
Reject call 2
Switch between 1
st
call and 2
nd
call
Check out the chart below for a complete guide on handling calls with your Hangtime.
For detailed warranty instructions and information visit:
USA:
www.hmdxaudio.com/customer-support/warranty-1yr
CAN:
www.hmdxaudio.ca/warranty-1yr
To obtain warranty service on your HMDX product, contact a
Consumer Relations representative by telephone or email for
assistance (you can find their contact info on page 1). Please
make sure to have the model number of the product available.
2m
LITTLE BIT OF WATER?
No worries. The smart folks who made this speaker
designed it to keep the party going through just about
anything (they call it IPX4). But those designers aren’t
miracle workers. Doing something like sending your
speaker for a swim in the deep end will fill those holes you
need for incredible sound with water. Remember to keep
the back flap flush with the speaker for the best protection.
