3D LED DIGITAL ALARM CLOCK
INSTRUCTION MANUAL
INTRODUCTION
Thank you for choosing the H'mc 3D LED clock. We hope this product will bring you total satisfaction.
MAIN FEATURES
3 buttons on product: MODE, DOWN, UP.
4 digits display. Time display, display hour and minute, 12/24hr display for option
.
Brightness option: high, medium, low.
Alarm and snooze function, when alarm turned on, the snooze default is on.
CR2032 as back-up battery to remember the time in case of electricity off.
Working power: 5V, powered by USB cable (USB adapter not included).
DISPLAY OVERVIEW
BUTTONS FUNCTIONS
MODE button
1. Under common mode, press MODE button to switch the display in this sequence: time display -
alarm display – auto-brightness ON/OFF.
2. Under time display, press and hold MODE key to enter time setting in this equence: 12/24HR
→ hour → minute → quit.
3. Under alarm mode, press and hold MODE key to enter alarm setting in this sequence: hour -
minute - snooze time – quit.
4. Under auto brightness adjusting mode, press and hold MODE to enter brightness changing time
setting in sequence: hour for high brightness to low brightness - minute for high brightness to low
brightness → hour for low brightness to high brightness → minute for low brightness to high
brightness → quit.
UP button
1. Under common mode, press UP key to adjust the brightness of back light in this sequence: high
brightness → medium brightness → low brightness.
2. Under setting mode, press UP to increase 1 unit of the figure, press and hold UP to increase the
figure quickly.
UK
AL PM
- 5 -
