HMC International NV
Page: 5/8
E3-Laan 89 - 9800 Deinze (Belgium)
Tel +32 (0)9 381 09 50 - Fax +32 (0)9 381 09 51
info@hmc -products.com - www.hmc -products.com
Document Number: 0001-8008a-0100a
2.5 Getting ready to use the device
- Plug the MJ-USB into a USB socket. Wait until the status led becomes continuously
green.
- Push the joystick to control the speed and direction of the mouse pointer.
2.6 Programming
The control system can be programmed to meet your needs. Programming can be
performed using the HMC USB Configurator tool.
Remark!
Programming should only be conducted by healthcare professionals with in-
depth knowledge of the MJ-USB. HMC International NV accepts no liability for losses of
any kind if the programming of the control system is altered from factory pre-set values.
2.7 Servicing
All repairs and servicing must be carried out by authorized service personnel. Opening or
making any unauthorized adjustments or modifications to the MJ-USB will invalidate any
warranty, and is strictly forbidden.
HMC International NV accepts no liability for losses of any kind arising from unauthorized
opening, adjustment or modifications to the MJ-USB.
If the MJ-USB is damaged in any way, or if internal damage may have occurred through
impact or dropping, have the product checked by qualified personnel before operating.
HMC International NV accepts no liability for losses of any kind arising from failure to
comply with this condition.
2.8 Warranty
The MJ-USB is covered by a warranty period defined by the service agent. For details of
the warranty period, please contact your service agent.
The warranty will be void if the MJ-USB has:
- Not been used in accordance with the MJ-USB user manual – this manual – from HMC
International.
- Been subject to misuse or abuse.
- Been modified or repaired by non-authorized persons.
