HM Machinery SBM 28B, Manual, Page: 17 / 76

UNLOAD TOOL OPERATION MANUAL
1. According to the Fig.2, please pull out the UNLOAD TOOL HANDLE.
2. First the left hand should hold the tool, then the right hand push upward the FEED
HANDLE.
ATTENTION:
When using should put the handle in “OFF” position.
CAUTION: Tools installation and disassembling should be performed after machine is completely
stop running.
CAUTION: When installing and disassembling the tools, the emergency stop switch should be
pressed down.
Open the safety guard, install the tools in the spindle hole, make sure it is fixed
installing.
NOTE: Close the safety guard, loose the emergency stop switch then running machine.