5
Routine Operation
SINGLE-LANE OPERATION
(one speaker post)
DUAL-LANE OPERATION
(two speaker posts)
Hands-Free (HF) Mode:
Hands-Free (HF) Mode:
Alert tone (single beep) sounds in headset, then
customer at speaker post or menu board can be heard.
Adjust customer’s voice level with up and down
arrows on headset if necessary.
Press and release
A1
or
A2
button to speak and
listen to customer. A single beep will be heard and
green light on headset microphone will come on
when headset begins transmitting.
Press and release
A1
,
A2
or
B
button to end
communication with customer. Two beeps will be
heard and light on headset microphone will go off
when headset stops transmitting.
Press and release
A1
or
A2
button if you want to
speak to the customer again. A single beep will be
heard and green light on headset microphone will
come on when headset begins transmitting.
If customer drives away from speaker post or
menu board, headset automatically stops
transmitting. Light on headset microphone will go off.
Alert tone (single beep for Lane 1, double beep for Lane 2)
sounds in headset, then customer at speaker post or menu board
can be heard.
Adjust customer’s voice level in headset if necessary.
Press and release
A1
button for Lane 1,
A2
for Lane 2, to
speak and listen to customer. A single beep will be heard and
light on headset microphone will come on when headset begins
transmitting. (Lane 1 = green, Lane 2 = red)
Press and release
A1
,
A2
(depending on lane)
or
B
button to
end communication with customer. Two beeps will be heard and
light on headset microphone will go off when headset stops
transmitting.
Press and release
A1
button for Lane 1 or
A2
for Lane 2, to
speak to the customer again. A single beep will be heard and
light on headset microphone will come on when headset begins
transmitting. (Lane 1 = green, Lane 2 = red)
To change lanes, press and release the opposite
A
button. A
voice in the headset will say “Lane 1” or “Lane 2.”
If customer drives away from speaker post or menu board,
headset automatically stops transmitting. Light on headset
microphone will go off.
Auto Hands-Free (AHF) Mode:
Auto Hands-Free (AHF) Mode:
NOTE:
Only one headset can be set for Auto Hands-Free at a time.
Alert tone (single beep) sounds in headset, then
customer at speaker post or menu board can be heard.
Adjust customer’s voice level with up and down
arrows on headset if necessary.
Speak and listen to customer without pressing any
buttons. A single beep will be heard and green light
on headset microphone will come on when headset
begins transmitting.
Press and release
A1
,
A2
or
B
button to end
communication with customer. Two beeps will be
heard and light on headset microphone will go off
when headset stops transmitting.
Press and release
A1
or
A2
button if you want to
speak to the customer again. A single beep will be
heard and green light on headset microphone will
come on when headset begins transmitting.
If customer drives away from speaker post or menu
board, headset automatically stops transmitting.
Light on headset microphone will go off.
Alert tone (single beep for Lane 1, double beep for Lane 2)
sounds in headset, then customer at speaker post or menu board
can be heard.
Adjust customer’s voice level in headset if necessary.
Speak and listen to customer without pressing any buttons. A
single beep will be heard and light on headset microphone will
come on when headset begins transmitting. (Lane 1 = green,
Lane 2 = red)
Press and release
A1
,
A2
(depending on lane)
or
B
button to
end communication with customer. Two beeps will be heard
and light on headset microphone will go off when headset stops
transmitting.
Press and release
A1
button for Lane 1 or
A2
for Lane 2, to
speak to the customer again. A single beep will be heard and
light on headset microphone will come on when headset begins
transmitting. (Lane 1 = green, Lane 2 = red)
If customer drives away from speaker post or menu board,
headset automatically stops transmitting. Light on headset
microphone will go off.
Push-To-Talk (PTT) Mode:
Push-To-Talk (PTT) Mode:
Alert tone (single beep) sounds in headset, then
customer at speaker post or menu board can be heard.
Adjust customer’s voice level with up and down
arrows on headset if necessary.
Press and hold
A1
or
A2
button to speak to
customer. A single beep will be heard when headset
begins transmitting. Green light on headset
microphone will be on while headset is transmitting.
Alert tone (single beep for Lane 1, double beep for Lane 2)
sounds in headset, then customer at speaker post or menu board
can be heard.
Adjust customer’s voice level in headset if necessary.
Press and hold
A1
button to speak to customer in Lane 1;
A2
to
speak to customer in Lane 2. A single beep will be heard when
headset begins transmitting. Light on headset microphone will be
on while headset is transmitting. (Lane 1 = green, Lane 2 = red)
To change lanes, press and release the opposite
A
button.
A voice in the headset will say “Lane 1” or “Lane 2.”
“B” Channel Hands-Free (BHF) Mode:
Press and release
B
button to speak and listen to other crew members. A single beep will be heard and light on headset
microphone will come on (alternating red/green) when headset is transmitting.
Press and release
B
button to end communication with crew members. Two beeps will be heard and light on headset
microphone will go off when headset stops transmitting.
Press and release
B
button if you want to speak to crew members again.
NOTE:
Pressing A1, A2 or B and talking when someone else is talking will not stop them from being heard, but
you and the other person will be heard at the same time.
