Trouble shooting:
Please use only the original charger
which was supplied with the HM E-RIDE!
This charger is specially made for the Lithium-
Polimer battery (LiPo9).
The LED (1) indicates the battery status as shown on the table below:
LED
MODE
Charging cycle and LED indication for LiPo battery
green
red
green
the battery is not connected
the batter is charging
the battery is charged, the charger switches off
Should there be any difficulties with charging please check if:
- the power cable is connected properly.
- the charger plug or the battery socket is damaged.
- the battery shows any damage on the surface.
- the power socket works and whether the correct voltage is provided.
(if necessary, plug in another gadget and check),
Should the problem persist, please contact the shop where
the e-bike was purchased or contact us at [email protected]
6
Charger function
1