HL-Tech WL-3002B, Hardware Installation And User'S Manual

Page: 8 / 18

HL-TECH Corporation
8
1.1 More Setting
Press “ Connetc this site “ in Figure 1-1to enter “ More setting “ window.
Figure 1-2
1.1.1 “ General Connection Setting ” group:
„
Read the current status from the group if the “ Change ” button is not pressed.
„
Press “ Change ” button for modifying the status, when the modification is finished,
press “ Apply ” to save it. The button “ Change ” and “ Apply ” is alternately shown on
the same position.
„
Modify the SSID name from the “ SSID ” field. When use the item, the “ any “will be
unchecked previously.
„
Change the channel by drop down menu “ Channel ”. When use the item, the
Ad_Hoc Mode will be set previously.
„
Select the transmission rate by “ Tx Rate ” drop down menu.
„
Select the “ Ad_Hoc ” or “ Infrastructure ” Mode by the “ Network Type ”
„
drop down menu.
„
Select the “ Enable WEP ” or “ Disable WEP ” by the “ Encryption ” drop
„
down menu.
„
Select the “ Open System ” , “ Shared Key ” mode or “ Auto ” from the
„
“ Authentication Mode ” drop down menu.